UL Approved Splitbolts

Made from high strength copper alloy to resist corrosion and provide premium electrical and mechanical performance.
Offered with extra-long body to allow connection of one or two taps to a single run conductor.
Wide wire range-taking capability minimizes inventory requirements.
Nut hex provides correct fit with socket, box, or open end wrenches resulting in proper torqueing of electrical connection.
Pressure bar provides secure connection on a full range of conductor combinations used with each connector assuring premium wire pull-out strength.
UL Listed and suitable for Direct Burial Grounding.

Material: Copper Alloy Size: Refer table below Finish: As required

UL Split bolt Data
Sr. No.	Catalogue Number	Copper Conductor			Wire Diameter Range (Inch)	Approximate Dimensions in Inches (Inch)				Torque (In-Lb)
		Range For Equal Main and Tap		Min. Tap With One Max. Main		Approximate Dimensions in Inches (Inch)
		Min	Max	Min. Tap With One Max. Main		A	B	C	D
1	EMP 01	16 STR	8 STR	16 STR	0.057 – 0.145	0.145	0.375	0.5	0.844	64.61
2	EMP 02	10 SOL	6 SOL	16 SOL	0.102 – 0.162	0.165	0.47	0.625	1.047	135.42
3	EMP 03	8 SOL	4 STR	16 SOL	0.128 – 0.204	0.215	0.5	0.6875	1.047	135.42
4	EMP 04	6 SOL	2STR	14 SOL	0.162 – 0.292	0.328	0.625	0.8125	1.312	221.27
5	EMP 05	4 STR	1/0 STR	14 SOL	0.204 – 0.325	0.381	0.6875	0.9375	1.83	309.78
6	EMP 06	2 SOL	2/0 STR	14 SOL	0.257 – 0.364	0.44	0.75	1	1.93	309.78
7	EMP 07	2 SOL	3/0 STR	12 SOL	0.324 – 0.408	0.472	0.875	1.125	2.1	398.28
8	EMP 08	1/0 STR	250 MCM	10 SOL	0.325 – 0.575	0.59	1	1.1875	2.4	548.75